10 Seconds Recording Bedroom LED Night Light DC5V USB Power

LED Desktop Recording Light USB Colorful Silicone Bedroom Night Light

1. Tap the product to adjust the light change: turn on the power switch, the warm yellow light is on; the first tap, the light changes color (the color is a 3 second gradient); the second tap, the light is positioned at the current color; the third tap, the light Closed; the cycle repeats.

2. Description of recording key: When the product is on, press and hold the recording key, and a beep will sound for the start of recording, and two beeps will be the end of recording. The recording time is about 10 seconds. (The old recording content will be replaced by the new recording)

3. Recording playback and closing: long press for 5 seconds and the indicator light flashes to turn on the sound mode (when the sound is on, the tapping light is in gradual and fixed color state, and the recording is played). Long press for 5 seconds to turn off the indicator light to turn off the sound mode. (The recording content will not be lost after restarting.)

4. When the light is extinguished by tapping, the product is still working and static current is generated. If you do not use it for a long time, please use the switch to turn off the power.

Tips

Before using this product for the first time, please fully charge it. Charging voltage/current DC5V/1000mA. It can also be charged with an isobaric power bank. It takes about 3 hours to fully charge. When charging, the red indicator light flashes, and when it is fully charged, the red indicator light stays on. The warm yellow light lasts about 20 hours, and the colorful gradient uses about 15 hours. No operation, after 2 hours, it will be automatically turned off, and then you need to press the power switch of the base.